Playing Images On A Tv - Sony Handycam DCR-SX40 Operating Manual

Playing images on a TV
Connect your camcorder to the input jack ofa TV or VCR using the A/V connecting cable
[] or an A/V connecting cable with S VIDE() [_. Connect your camcorder to the wall
outlet (wall socket) using the supplied AC Adaptor for this operation (p. 13). Refk, r also to the
instruction manuals supplied with the devices to be connected.
[] A/V connecting cable (supplied)
Connecting to another device via the A/V jack using an A/V connecting cable.
[] A/V connecting cable with SVIDEO (sold separately)
When connecting to another device via the S VIDEO jack, by using an A/V connecting cable
with an S VIDEO cable (sold separately), higher quality images can be produced than with an
A/V connecting cable. Connect the white and red plugs (left/right audio) and the S VIDE() plug
(S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (sold separately). The
yellow plug connection is not necessar)c Connecting only the S VIDEO plug will not output
audio.
A/V R
A/V Remote Connector
m
VIDEO
@
IDEO (Ydlow)
AUDIO
(White) (Red)
'*............. _ (Yellow)
_ J o :Signal flow
VCRs or TVs
Set the input selector of the TV to the input your camcorder will be
connected to.
• For details, refer to the instruction manuals supplied with the T'_(
Connect your camcorder to a TV with the A/V connecting cable
([_,
supplied) or an A/V connecting cable with S VIDEO ([_, sold separately).
• Colmect your camcorder to the input jack of the T'vi
Play back movies and photos on your camcorder (p. 20).
• You can set the aspect ratio according to the connected TV (wide/4:3) by touching t_ (HOME) --+
(SETTINGS) --' [OUTPUT SETTINGS]--_ [TV TYPE]--_ [16:9] or [4:3]--' {1_ --' _--_ IX]. 2s 3