Adjusting Convergence (Convergence) - Sony KP-61V45 Operating Instructions Manual

4
5
Press t or ) to select CHANNEL ERASE/ADD,
and press _.
The CHANNEL ERASE/ADD menu appears.
C"%E ERASE,AO0 ,'
A_&Nu
Use[O - 9]or {CH+/-]
to select the channel.
Use _] _ Exit
Erase and/or add channels:
To erase an
unwanted channel
(1) Make sure the cursor (,) is beside ERASE.
(2) Press CH +/- or the 0 - 9 buttons to select the
channel you want to erase, and press ENTER.
CH
or
Selected channel number
CHANNEL ERASE/ADD _1
®®® '; 22u
®®®
@ @ _ _ UoSe[eO_t_,hor[OHn/rel. I
@ Use _ (3_ Exit _ I
(3) Press CE).
The "-" indication appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel that you want
(1) Press t or !_ to move the cursor (_') to ADD.
(2) Press the 0 - 9 buttons to select the channel you
want to add, and press ENTER.
@®®
®®®
®
(3) Press (2E).
Selected channel number
CHANNEL_:2uERASE_ADD _1
Use _ _
Exit @I
The "+" indication appears beside the channel
number, showing that the channel is added to
the preset memory.
6 To erase and/or add other channels, repeat
step 5.
7
Press MENU to return to the original screen.
MENU
Notes
• if you erase or add a VHF or UHF channel, the cable ]V
channel with the same number is also erased or added, and
vice versa.
• Erasing and adding channels is also available for the AUX
input.
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on tile screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page 17). Do this procedure only
when you want to adjust it manually.
1
Press MENU.
2
Press • or 4 to select _, and press _.
3
Press t or 4 to select CONVERGENCE, and
press _:.
The CONVERGENCE adjustment screen appears.
R CONVERGENCE
B
_ Exit _N_
R R=Red
G=Green
B=Blue
Getting Started I 19
EN