Snapper LT120G30DB Safety Instructions & Operator's Manual page 53

OPERATING INSTRUCTIONS
_._ net :_unlI: [_lr:l-_ n[o]"J"JI _[riYl: 1:1=1 nl ,] ;1 Lvi=
STARTING WHEEL DRIVE OF HYDRO MODELS
Shift speed controllever to neutral.
Start engine.
Release brake pedal.
Slowlyshiftspeed controlleverforwardfor forwardmotion
or to the rear for reverse motion.See Figure9.
STOPPING WHEEL DRIVE
Fully depress clutch/brake pedal to stop wheel drive.
Shift speed control lever to neutral. See Figure 10.
NOTE: (HYDRO DRIVE MODELS ONLY)
When the tractor is moving forward and the clutch/brake
pedal is pushed all the way down, the speed control
handlewillautomaticallyreturnto approximately1/3offull
forward speed. Move handle to desired position after
releasing brake pedal.
STARTING WHEEL DRIVE OF GEAR MODELS
Shift speed controllever to neutral.
Start engine.
Fully depressclutch/brakepedal.
Move speed controlhandle forward to Firstspeed.
See Figure 11.
Slowly release clutch/brakepedal to begin motion.
FORWARD
SPEEDS
CLUTCH/BRAKE
PEDAL
SPEED CONTROL
HANDLE
HANDLE
REVERSE
I
FIGURE 9
CLUTCH/BRAKE
PEDAL TO STOP
WHEEL MOTION
FIGURE 10
NOTE: (GEAR DRIVE MODELS ONLY)
The clutch/brake pedal must be fully depressed when
changing speed.
FORWARD
SPEEDS
REVERSE
NEUTRAL
FIGURE 11
8