Setting Up Internet@Tv - Samsung PN50C7000 User Manual

Advanced Features
Account Login
For an application with multiple accounts, use _ and _, to
access the different accounts.
For a more enjoyable application experience, register
and log in to your account.
For instructions on creating an account, refer to
Settings --_ Internet@TV ID _ Create.
1. Press the Red button in the Internet@TV home page.
2. Select the desired User account, then press the
ENTER I_ button.
If you want to create an account, press the Red
button; then the create account OSD window will
appear.
3. After selecting User account, enter the Password using
the number button on the remote control.
When Iogin succeeds, User account will be
displayed on the screen.
Setting up Internet@TV
ml System Setup
Ticker Autorun (Off / On): You can set Ticker Autorun
to come on when powering on the TV.
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on [nternet@TV must be
downloaded to use this feature.
Depending on your country, the Ticker application
may have a different service or not be supported.
Channel Bound Service (Off/On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
Change the Service Lock password
The default password set is "0-0-0-0."
If you forget the password you created, press the
following sequence of remote control buttons to
reset the password to "0-0-0-0": POWER (off)
MUTE _ 8 --_2 --_ 4 --_ POWER (on).
Reset: Resets Internet@TV settings to factory default
settings.
ml Internet@rv ID
You can use this menu when creating and deleting
the account. You can control your account including
contents site's account information.
Create: Create an account and link it with desired
service applications.
NOTE
* Maximum number of accounts is 10.
* Maximum number of characters is 8.
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using the A and T buttons and
press the ENTERE_ button.
8 English