Samsung SPL4225 Owner's Instructions Manual page 10

Turning the Monitor(PDP) On and Off
Press the Power button on the remote control
The PDP will be turned on and you will be ready [o use it's
features.
You can also use the Power button on the front of the
PDE
Notes:
• if your Monitor isn't turned on when the power button is
pressed: Press the MODE button to check if the Monitor
"node has been chosen ( |.
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it con-
venient and fast to use features on the PDR Your PDP also lets you display the status of many of your PDP's
features.
Viewingthe Menus
With the power on, press the Menu button on the
remote control. The main menu appears on the screen.
The Video menu is selected.
2 Use the joystick (up, down) button to move items in the
menu. Use the joystick (left, right) button to display,
change, or use the selected items
Use thejoystick ((_)J) button to enter items in the menu.
On screen menus disappear from the screen
automatically after about thirty seconds, or you can
press the Menu button on your remote control to exit the
menu.
Displaying StatusInformation
Press the Display button on the remote control. ]he PDP will
display the Screen size, Resolution, Current time, and screen
mode.
Displaying Clock
Press the Clock Display button on the remote control.
The Current time wil! be displayed on the screen,
18 19