Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung LN40C550 User Manual

When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHF Antenna
..,_%.
Or
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERLb button. Plug & Play is available only when the input source is set to TM
To return to the previous step, press the red button.
Selecting a tar" guage Press the A or 1!' button, then press the ENTERIZ_ button. POWER
Select the desired OSD (On Screen Display) language. _|_
Selecting Store Demo Press the ,_ or !_ button, then press the ENTERIZ_ button.
or Home Use o Select the Home Use mode. Store Demo Mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
stanaara_: Press the volume button on the TV. When you see the
votume In _ne OSD, press and hold MENU for 5 sec.
Selecting an antenna
Selecting a channe
Setting the Clock
Mode
Vtewlng the HD
Connection Guide,
Press the A or T button, then press the ENTERI__ button. Select Air, Cable or Auto.
<_ n Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the A, T, ,_ or I_ button, then press the ENTERI__ button.
The channel search will start automatically.
For more information, refer to Channel -_ Auto Program. (R 12)
Press the ENTERIZ*3 J button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
<_ If y )u setect the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the rNTV_ _ button.
if You Want to Reset This Feature...
(_ MENU rm -_ Setup -_ Plug & Play -_ ENTERI__
English 7
BNdS-02d04A Eng.indb 7 2010-02-10 _C 8:19:10