Changing The Picture Options - Samsung LN40C550 User Manual

4. Navigate to the "Settings" tab on the display dialog-box.
• The correct size setting (resolution)
[Optimum: 1920 X 1080 pixels]
• If a vertical-frequency option exists on your display
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.
Changing the Picture Options
Advanced Settings ...........................................................................................
(_ MENU iTR--_ Picture --_Advanced Settings --_
ENTERE_
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
m
m
m
m
m
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High):
Adjust the screen contrast.
Shadow Detail: Increase the brightness of dark images.
Disabled under PC mode.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off/Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
ml Color Space (Auto / Native): Adjust the range of colors
available to create the image.
ml White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
ml Flesh Tone: Emphasize pink "flesh tone".
ml Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
(_ MENU iTR--_ Picture --_ Picture Options --_
ENTER I_
In PC mode, you can only make changes to the Color
Tone, Size and Digital Noise Filter.
Ill Color Tone (Cool / NormN / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
ml Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i/1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
* After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the !_ button to select Position.
2. Press the ENTERE_ button.
3. Press the A or _' button to move the picture up
or down.
4. Press the ENTERC_ button.
5. Press the !_ button to select Reset.
6. Press the ENTERC_ button to reset the picture
to its default position.
English 15
BNdS-02d04A Eng.indb 15 2010-02-10 _C 8:19:18