Picture In Picture (Pip); Support Menu - Samsung LN40C550 User Manual

m Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
m Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
NOTE
* Only available when the Input source is set to TV.
To turn the melody off, set Melody to Off.
* The Melody does not play.
- When no sound is output from the TV because the
MUTE button has been pressed.
- When no sound is output from the TV because the
volume has been reduced to minimum with the
VOL - button.
- When the TV is turned off by Sleep Timer function.
Picture In Picture (PIP)
PiP
[_ MENU rlTl --_ Setup --, PiP --, ENTERI_
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
NOTE
* For PIP sound, refer to the Sound Select
instructions.
* If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
* You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
* While V-Chip operation, the PIP function cannot be
used.
* PIP Settings
PC
ml PIP (Off / On): Activate or deactivate the PIP function.
ml Air/Cable (Air / Cable): Select either Air or Cable as
the input source for the sub-screen.
ml Channel: Select the channel for the sub-screen.
ml Size ([_ / [_): Select a size for the sub-picture.
ml Position ([_ / _ / _ / _): Select a position for the
sub-picture.
ml Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
Available when PIP is set to On.
(_ MENUiTrl --_ Support --_ ENTERE_
Self Diagnosis
ml Picture Test: Use to check for picture problems. If the
problem continues to occur, check the Color pattern.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung's Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device's user manual.
ml Sound Test: Use the built-in melody sound to check for
sound problems.
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung's Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device's user manual.
ml Signal Information (digital channels only): An HD
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
ml Troubleshooting: If the TV seems to have a problem,
refer to this description.
If none of these trouble shooting tips apply,
contact the Samsung customer service center.
iiiiiiiiiiiiiiiiiiii
English 21
BNdS-02d04A £ng.indb 21 2010-02-10
CC 8:19:19