Samsung HMX-M20BN User Manual page 67

WARNING ND CATORS AND MESSAGES
USB
Fail Printer
Connecting A problem occured when
connecting the camcorder
Change 'USB via USB to a printer,
Connect'
Fail USB Connecting A problem occured when
Change 'USB connecting the camcorder
Connect' via USB to a PC,
There is a problem with the
Ink Error
ink cartridge.
There is a problem with the
Paper Error
paper,
File Error There is a problem with the
file.
Pnnter Error There is a problem with the
printer,
Pnnt Error A problem occured during
printing.
• Check the USB cable,
• Try the connection procedure again,
• Switch "USB connect" function to
"PictBridge."
• Check the USB cable,
• Try the connection procedure again,
• Switch "USB connect" function to "Mass
Storage."
• Check the ink cartridge.
• Put a new ink cartridge in the printer,
• Check the paper in the printer, If there is no
paper, insert paper.
• Your camcerder does not support this file
format.
• Try another file recorded on your
camcorder.
• Turn the printer's power off and on.
• Centact the printer manufacturer's service
center.
• Do not remove power seurce or eject
memory card during printing,
When there is dew condensation, put the camcorder aside for an hour or two before using it
• What is dew condensation?
Dew condensation occurs when you move a camcorder between locations that have
significant temperature difference. The dew condenses on the external or internal parts
of the camcorder, and on the reflection lens. When this happens, it may cause the
camcorder to malfunction or damage the camcorder when you turn the power on.
• Exactly when does the dew condensation occur?
When you move the camera to a location with a higher temperature than the previous
location, or when you move it to a hot area suddenly. Examples:
You record outside in cold weather during -- the winter and then move the camera in
indoors.
You record outside in hot weather after being indoors or inside a car where the A/C was
running.
• What can you do?
Turn the power off, detach the battery pack, and leave the camcorder in a dry area for 1 to 2
hours before using it.
133