Auto Wall-Mount Adjustment (Sold Separately) - Samsung LN46A630 User Manual

Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easil adjusted.
Auto Wall-Mount
TV Rear Panel
EX-LINK Cable
(Not supplied)
Entering the menu
1. Press the A, _', 4 or I_ button on your remote control.
>- The Wall Mount Adjustment screen is displayed.
>- If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the A or _r button to select
"Setup", then press the ENTER _ button.
• Press the A or • button to select "External Settings", then press the ENTER I:_
button.
• Press the A or _' button to select "Wall-Mount Adjustment", then press the
ENTER G ,J button.
Remembering the Position
2. Adjust to the desired position using the A, _', 4,1_ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
> Press the INFO button to reset. Press the _ or _, button to select "Yes",
then press the ENTER _ button. The position is initialized to the default
setting.
3. Pressthe Blue button.
Press the A and _' buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
>- To not save the current position, press the RETURN button.
>- When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER _ button to save.
>- When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5. Pressthe ENTER[:_ button.
>- The saved Position appears on the left side of the OSD.
Moving to the remembered position
1,
2=
Complete Step 1 of "Entering the menu".
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
>- You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
>- If you adjust the position after moving to a pre-set position, the position display will disappear.
>- For installation, refer to the Installation Manual provided with the wall mount.
>- For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
>- This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
>- The auto wall mount will not work when Anynet+ or WISELINK is operating.
>- LN40A630M1F and LN46A630M1F models are not compatible with the older wall mount model (WMN5090A).