Samsung LN46A630 User Manual page 53

3=
The "V-Chip" screen will appear.
Press the A or _' button to select "Change PIN", then press the ENTER
button. The Change PIN screen will appear. Choose any 4 digits for your
PIN and enter them. As soon as the 4 digits are entered, the "Confirm New
PIN." screen appears. Re-enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized.
Press the EXIT button to exit.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off --_ Mute --_ 8 --_ 2
--_4 --_ Power On.
How to Enable/Disable the V=Chip
1. Press the MENU button to display the menu.
Press the A or • button to select "Setup", then press the ENTER _ button.
2. Press the A or T button to select "V-Chip", then press the ENTER I:_
button. The message "Enter PIN" will appear. Enter your 4 digit PIN number.
3= The "V-Chip" screen will appear.
To enable the V-Chip feature, press the ENTER _ button so that the "V-Chip
Lock" field is "On". (Pressing the A or V' button will alternate between "On"
and "Off".)
Press the ENTER _ button.
Press the EXIT button to exit.