Changing The Picture Standard; Customizing The Picture Settings - Samsung LN46A630 User Manual

Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER c_ button to select "Picture".
2=
Press the ENTER _ button to select "Mode". Press the A or V button to
select "Dynamic", "Standard" or "Movie". Press the ENTER _ button.
* Dynamic: selects the picture for high-definition in a bright room. ......................... ...............
, Standard; Selects the picture for the optimum display in a normal
environment.
, Movie: Selects the picture for viewing movies in a dark room.
3, Press the EXIT button to exit.
Easy Setting
1, Press the TOOLS button on the remote control.
2, Press the A or _' button to select "Picture Mode".
3, Press the 4 or I_ button to select the required option.
4, Press the EXIT or TOOLS button to exit.
Customizing the Picture Settings
Your television has several setting options that allow you to control the picture quality.
1. To select the desired picture mode, follow the "Changing the Picture
Standard" instructions numbers 1 and 2.
2. Press the A or _' button to select "Backlight", "Contrast", "Brightness",
"Sharpness", "Color" or "Tint(G/R)", then press the ENTER C_ button.
3. Press the 4 or I_ button to decrease or increase the value of a particular
item. Press the ENTER _ button.
Press the EXIT button to exit.
>- When you make changes to "Backlight", "Contrast", "Brightness",
"Sharpness", "Color" or "Tint(G/R)", the OSD will be adjusted accordingly.
>- In PC mode, you can only make changes to "Backlight", "Contrast" and
"Brightness".
>- Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
>- The energy consumed during use can be significantly reduced if the level
of brightness of the picture is reduced, and that this will reduce the overall
running cost.
, ContraSt: Adjusts the contrast level of the pictu[e.
. Brightness: Adjusts the brightness level of the Picture.
, Sharpness: Adjusts the edge definition of the pictur e.
, co!or: AdjuSts €obr Saturation of the picture,
, Tint(G!R): Adjusts the color tint of the picture.