Input Menu; Support Menu - Samsung UN55B6000 User Manual

input Menu
[]
[]
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
Press the SOURCE button on the remote control to view an external signal source.
TV / AV / Component I PC / HDMII/DVI / HDMI / HDMI / HDIVII4/ USB
You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
If USB devices are connected to the USBI(HDD) and USB2 jacks, they are displayed as
USB1 and USB2 in order.
PC always stays activated.
Using the color buttons on the remote with the Source list
Red (Refresh): Refreshes the connected external devices. Press this if your Source is
on and connected, but does not appear in the list.
TOOLS (Tools): Displays the Edit Name and information menus.
Edit Name
VCR 1 DVD / Cable STB / Satellite 8TB / PVR 8TB / AV Receiver / Game / Camcorder / PC / DVl / DVl PC / TV / IPTV / Blu-ray
/ HD DVD 1DMA
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDIVlm IN I(DVl) port, you should set the NDMII/DVl
mode to DVl PC in the Edit Name of the input mode.
When connecting an HDMI/DVI cable to the HDIVll IN I(DVt) port, you should set the HDIViIIlDVl mode to DVl or DVl PC in
the Edit Name of the input mode. In this case, a separate sound connection is required.
Support Menu
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern on the
screen to see if the problem still exists.
• Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV. Contact Samsung's call center for assistance.
• No: If the test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to the
external device's user manual.