Samsung LN-S3252D Owner's Instructions Manual page 20

555
e5 c_ _ c_
k, J
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD button on your TV's remote controh
3. Press the SEr button oll your TV's remote control.
4. Using the nmnber buttons on your remote conlrol, enter three digits of the DVD code listed on
page 20~21 of this manual for your brand of DVD. Make sure you enter three digits of the code,
even if the first digit is a "0". (if more than one code is listed, try the first one.)
5. Press the P()_'_'ERo button on the remote controh
Your DVD should turn on if your remote is set up correctly.
if your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of DVD. if no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still control your TV's volume.
CNE? _"
555
_ _ EZ3_
J
Setting Lp the Remote to Operate Your Set lbp Box
1. Turn off your STB.
2. Press the SrB button on your TV's remote controh
3. Press the SEr button on your TV's remote controh
4. Using the number buttons on your remote control enter three digits of the STB code listed on
page 21 of this manual for your brand of STB. Make sure you enter three digits ol the code, even
if the first digit is a "(t". (if more than one code is listed, try the first one.)
5. Press the P()_,_'ER_3 button on the remote controh
Your STB should turn on if your remote is set up correctly.
if your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of STB. if no other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still control your TV's volume.
English-18