Samsung LN-R3228W Owner's Instructions Manual page 81

TROUBLESHOOTING
Verlical bars appear io
flickerdiuer or shimmer
on lhe image.
Screen is black and
power indicalor lighl
blinks sleadily.
Image is no_ slable and
may appear 1o vibrale
when you have a
computer connecled _o
the PC inpm.
Auras[ _iie Coarse mnmg and then adjust the Free tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard,
If the setting is not correct, use your computer utility program m
change the display settings,
NOTE: Your TV supports nmltiscan display functions within the
fifllowing frequency domain:
(kHz_
Vcrlicai fl'equencv tllz} 60~75
tat 60Hz)
'_360 x 768
hnage is nol cenlered on
the screen.
Ifa still image is displayed
h)r an exlended period of
time. residual images or
blurring may appear.
Adjust the horizontal and vertical position,
The screen position nmst be adjusted on the outpm
source _i.e. STB'_ with a digital signal.
When you need to leave tile monitor unuseo fl)r an extended
period (ff time, adjust the settings so that the monitor
automaticMly goes into energy saving mode or actiwttes the
screen saver to display moving images.
The TPT LCD panel uses a panel consisting of sub pixels (3.147.26a_ which require sophisticated
teclmology m produce.
However. there may be few bright or dark pixels on the screen. These pixels will have no impacl
on the perfimnance of the prnduct.
English-TG