Table of Contents
Advertisement
Connecting
an Amplifier/DVD
Home Theater
Amplifier/DVD
Home Theater
TV Rear Panel
@@
ee
E
Audio Cable (Not supplied)
>_
Each external input source device has a different back panel configuration.
>_
When connecting an external device, match the color of the connection terminal to the cable.
1=
Connect Audio Cables
between the AV OUT [L-
AUDIO-R] on the TV and
AUDIO IN on the
Amplifier/DVD Home
Theater.
When an audio amplifier
is connected to the
"AUDIO OUT [L-AUDIO-
R]" terminals: Decrease
the gain (volume) of the
TV, and adjust the
volume level with the
Amplifier's volume
control.
Operation
Turning the TV On and Off
POWER
SOURCE
Press the POWER
button
on the remote
control.
You can also use the POWER
button on the TV.
Plug & Play Feature
When the TV is initially powered on, basic customer settings proceed automatically and subsequently:
1,
Press the POWER button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER button, then "Select the language of the OSD." menu is
automatically displayed.
2,
Press the ENTER button to enter the language.
Press the • or • button to select language, then press the ENTER button.
"Select the antennas to memorize." menu is automatically displayed.
3=
Press the •
or •
button to memorize
the channels
of the selected
connection.
Press the ENTER
button to select "Start".
>_ If the antenna is connected to ANT 1 (AIR), select "Air" and if it is connected to ANT 2
(CABLE), select "Cable".
>_ If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
>_ In Cable mode, you can select the correct signal source among "STD", "HRC", and
"IRC" by pressing the • button, then press the •
or •
button.
Press the I_ button to select "Start", then press the ENTER
button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Continued...
English- 13
Hide quick links:
Advertisement
Table of Contents
