Setting Up Your Remote - Samsung TX-S3082WH Owner's Instructions Manual

Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set Top Box.
Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
:'_ The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
AUTO PROG ADD/DEL MTS SRS
)sEr F) R_SEr
_AMSUNG
Setting Up the Remote control to Operate Your VCR
1, Turn off your VCR.
2, Press the VCR button on your TV's remote control.
3, Press the SET button on your TV's remote control.
4, Using the number buttons on your remote control, enter three digits of the VCR
code listed on page 20 of this manual for your brand of VCR. Make sure you
enter three digits of the code, even if the first digit is a "0". (If more than one
code is listed, try the first one.)
5, Press the POWER button on the remote control. Your VCR should turn on if
your remote control is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of VCR. If no other codes are listed, try
each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still control your
TV's volume.
AUTO PROG ADD/DEL MTS SRS
_;AMSUNG
Setting Up the Remote control to Operate Your Cable Box
1, Turn off your cable box.
2, Press the CABLE button on your TV's remote control.
3, Press the SET button on your TV's remote control.
4, Using the number buttons on your remote control, enter three digits of the cable
box code listed on page 21 of this manual for your brand of cable box. Make
sure you enter three digits of the code, even if the first digit is a "0". (If more
than one code is listed, try the first one.)
5, Press the POWER button on the remote control.
Your cable box should turn on if your remote control is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try
one of the other codes listed for your brand of cable box. If no other codes are
listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "CABLE" mode, the volume buttons still control your
TV's volume.
English- 18
Continued...