Connecting A Camcorder - Samsung TX-S3082WH Owner's Instructions Manual

Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as
fbllows:
TV Rear Panel
> When connecting an external device, match the color of the connection terminal to the cable.
1=
2=
Connect a video cable
between the AV OUT
[VIDEO] jack on the TV
and the VIDEO IN jack on
the VCR. Refer to your
VCR's instructions for
more information about
how to record using this
kind of connection.
Connect a set of audio
cables between the AV
OUT [L-AUDIO-R] jacks
on the TV and the AUDIO
IN jacks on the VCR. (The
VCR input jacks might be
either on the front or on
back of the VCR.)
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
Camcorder
> Each external input source device has a different back panel configuration.
> When connecting an external device, match the color of the connection terminal to the cable.
Connecting a DVD Player/Set-Top Box
1=
2=
Connect a Video Cable (or
S-Video Cable) between
the AV IN2 [VIDEO] (or S-
VIDEO) jack on the TV
and the VIDEO OUT jack
on the camcorder.
Connect Audio Cables
between the AV IN2 [L-
AUDIO-R] jacks on the TV
and the AUDIO OUT jacks
on the camcorder.
The rear panel jacks on your TV make it easy to connect a DVD player/Set Top Box to your TV.
DVD Player/Set-Top Box
Audio Cable (Not supplied)
TV Rear Panel
P{
Component Cable (Not supplied)
> Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for
enhanced video quality. Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable to
COMPONENT IN also.
> Each external input source device has a different back panel configuration.
> When connecting an external device, match the color of the connection terminal to the cable.
1, Connect a Component
Cable between the
COMPONENT IN 1 [Y, PB,
PR](OrCOMPONENT IN 2
[Y, PB, PR]) jacks on the TV
and the COMPONENT Y,
PB, PRjacks on the DVD
Player/Set-Top Box.
2, Connect Audio Cables
between the COMPONENT
IN 1 [L-AUDIO-R](or
COMPONENT IN 2 [L-
AUDIO-R]) jacks on the TV
and the AUDIO OUT jacks
on the DVD Player/Set-Top
Box.
English- 11