Selecting The Video Signal=Source - Samsung LT-P2045 Owner's Instructions Manual

BN6B-00633A-06Eng 2.qxd.q b/12/04 5:22 PM Page_6
I
OPERATION
I
Memorizing the Channels
Your TV can memorize and store all of the available channels lk)r both "off-air" (antenna)
and cable channels. A0er the available channels are memorized, use the CH/', and CH v
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the awdlable channels, you must specify the
type ot signal source that is connected to the TV (i.e., an antenna or a cable system).
Press the MENU button
to display the men u`
Press the
UP/DOWN AV 5uttons
to select _'Channer', then
!i!iii
2
Repeatedly press the
ENTER_ button to
cycle through these
choices:
Air, STD. HRC or IRC
all cable TVL
Ghanr_J
Press the
U P/DOWN AV
buttons to select the
Video signal source,
then press the
ENTER_ button.
Press the EXIT button
to exit.
Note :STD, HRC _mdIRC identify,various types of cable
TV systems. Contact your local cable company to identify,
the type of cable system that exists in your particular area.
At this point, the signal source has been selected.
Pr(x:eed to "Storing Ch_mnels in Memou" (next page).
English- 16
4>