How To Use - Eureka 2940 series Owner's Manual

HOW TO USE

WARNING: Avoid injury. Keep loose clothing,
hair, fingers, and all other parts
of body away from any moving
part (such as the revolving brush).
Turn off the switch and unplug the
cleaner before changing the cleaner
height setting.
ON/OFF Switch.
International symbol I
means On, International
symbol O means Off.
Cleaner Height Setting
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning. If the cleaner is
difficult to push, move adjustment to next highest setting
until cleaner is comfortable to push. The brush roll must
reach the carpet for effective cleaning. For ease in moving
the adjustment knob, place handle in operating position and
tilt cleaner back to remove weight from front wheels.
Helpful Information:
Listen to your cleaner. If you notice a change in the sound
of the motor or a change in performance, it could simply
indicate a common usage or maintenance issue. Such
as, a need to raise or lower the carpet height adjustment,
possible blockage in hose or brush roll area, or a broken
or loose brush roll belt. These are all easy to fix and the
instructions are included in this owner's guide. Becoming
familiar with the information in this guide will help you to
get the best possible performance from your new cleaner
for many years to come.
4
Handle Release.
on handle release to pull
handle back to a comfortable
operating position. To lower
handle completely to the
floor, depress handle release
a second time.
Helpful Information:
Before cleaning under
low furniture, check area
first for objects that might
harm the unit or block the
vacuum hose.
. An adjustment that raises or
NOTE: While using accessories, do not place
cleaner on furniture or steps as the
brush roll may cause damage. Place
cleaner on floor with the handle in
storage position.
1. To use accessories remove hose from hose retainer in
hood of cleaner by lifting up and twisting.
2. Place desired accessory onto end of hose or wand.
Step
Dusting/Upholstery Brush
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
between cushions.
Nested extension wands
•
Turn ridge end to center.
The instructions in the booklet serve as a guide to routine
maintenance. To avoid unnecessary service calls, check the
top and bottom filters, belt and brush roll often.
Dusting/
Upholstery
Brush
Crevice
Wand
is for furniture, blinds,
cleans corners, stairs, baseboards, and
to add reach.
•
Grasp both wands near ridges.
•
Pull apart.
•
Push wands together.