Preferences - Avid Technology Artist Mix User Manual

Preferences

Preferences tab
Footswitch
Artist Mix lets you connect a footswitch for hands-free punch in/out. Connect a footswtich to the 1/4-inch FOOTSWITCH input
on the back panel.
To configure the Footswitch in EuControl:
In the Footswitch section of the Preferences tab, click to select the desired Punch In and Punch Out assignments:

Record | Record When the application is rolling, pressing the footswitch once punches into recording on record enabled tracks.
Pressing the footswitch again takes the track(s) out of record but does not stop the transport.
Record | Play Pressing the footswitch once punches into recording on record enabled tracks. Pressing the footswitch again stops
the record pass (your DAW may or may not automatically take the track out of record on stop; see the documentation for your
application).
Status Shows whether the footswitch state is currently on or off.
Shift + Fader Sets Level to 0dB
When enabled, holding SHIFT and touching a fader sets the fader to 0dB. SHIFT-lock does not apply (SHIFT must be pressed).
Artist Control Display
This feature only applies to Artist Control. See the Artist Control User Guide.
Artist Mix, Artist Transport and Artist Color Display Screen Dim Time
Drag the slider to set the amount of inactive time before the display screens of any Artist Mix(es), Artist Transport, or Artist Color
in your system dims to half intensity.
30 Artist Mix User Guide