Audio Controls; Mute; Tone Controls; Audio Processor - RCA F38310 User Manual

AUDIO CONTROLS
The Audio menu lets you adjustthe controls that involve the TV'saudio
outputs.To access the Audio menu, pressMENU on the remote, then
select Audio from the main menu,
MUTE
Turn Mute on (select Sound Off) to set the TV's volume to its minimum
level. The same can be accomplished by pressing MUTE on the remote
control.
TONE CONTROLS
Lets you adjust the Bass, Treble and Balance. Use the right and left arrow
buttons on your remote to adjust the sliders. Increasing the bass and
treble output from the TV's internal speakers increases the low and high
tones, respectively. Adjusting the balance shifts the audio output
between the left and right internal speakers.
AUDIO PROCESSOR
Displays a choice list of available audio modes, which control the way
the sound comes through your speakers.
To make settings:
1. Press MENU to access the main menu.
2,
Select Audio, and then select Audio Processor. Depending on your
speaker setup, any combination of the following options will
appear:
• Mono Plays the sound in monophonic audio only. This should
only be used when receiving broadcasts where distance from the
broadcasters makes the stereo signal weak. The channel banner
displays the word Mono when you tune to a program that is
broadcast in mono.
• Stereo Splits the incoming stereo audio signal into left and right
front channels. Most "FV programs and recorded materials have
stereo audio. The channel banner displays the word Stereo when
you tune to a program that is broadcast in stereo.
r For information on connecting external
speakers to your HDTV, see the section
J
"Setup and Connections."
46