Set Date & Time; Frequently Asked Questions - Ematic eGlide Reader Pro User Manual

Set Date & Time
From Home screen or Application menu, Press Settings to enter setting interface. Or on the home screen, press
Settings on the menu bar.
Select Date &Time and Press to enter, then you can
Automatic: Use network-provided values
Set date: Press + or – on each date field to change the Month, Day and Year, then Press Set to confirm the date setting.
Select time zone
Set time: Press + or – on each time field to change the Hour and Minute, then Press Set to confirm the time setting.
Use 24-hour format or not
Select date format

Frequently Asked Questions

1. My device does not turn on.
Make sure that the power adapter is securely connected
Make sure that you are using the power adapter that was included with your device.
Make sure that the device is turned on.
2. My device does not recognize the memory card.
Make sure that you have inserted a certified memory card.
Make sure that you have inserted the memory card correctly.
With your memory card inserted, power off and reset the device.
3. My device shows a low-battery warning
The device is low on power and needs to be charged before you can use it.
4. I cannot access the web
Check the wireless signal indicator in the status bar at the top of the screen. If there is no signal, you are not connected.
5. The display freezes or does not respond
Press and hold the power button to turn device off and turn it on again.
32
, then select