Inserting Media; Connecting To The Pc - Ematic eGlide Reader Pro User Manual

NOTE
If the machine is not in use for a long time, in order to avoid damage caused by battery excessive consumption, please be sure to make a
battery charge and discharge once within one month to prevent battery from running down.
With built in Lithium polymer batteries, it has to be charged regularly. The battery damage caused by excessive consumption of polymer
battery will not be covered by guarantee. If using a charger that is not exclusively equipped for this machine, the problem caused by it
also will not be covered by guarantee.
If the device has no quantity of electric charge, you cannot connect to the PC to copy files, you should charge first.

Inserting Media

The device supports SD card.
You can operate music, pictures, files and applications on the device through a memory card.
When no SD card inserted, your device will read the internal memory.
Note: Do not use any force while inserting a memory card.

Connecting to the PC

Files can be transferred directly into the device by using the USB data cable.
Make sure that your computer has been started before you start
Connect the mini plug of the USB cable to the mini USB port on your device and plug the other end into a free USB port to your PC.
The computer system detects "New hardware" and starts to install the driver automatically. Wait for the system to finish the installation.
When it has finished, a new "Removable Disk" will be created in "My Computer".
Drag and drop the files on your computer to the "Removable Disk".
To disconnect the USB cable from the computer, click the Safely Remove Hardware icon on the task bar. Click the USB Mass Storage
Device, and then click OK. Then you can unplug the player safely.
6