Inserting Media; Connecting To The Pc - Ematic eGlide Pro User Manual

not covered by the guarantee.
If the device has a low battery charge, you cannot connect to the PC to copy files without first charging the battery.
If the device has shut down, Power on before connecting to a PC to copy files.

Inserting Media

he device supports Micro SD cards.
T
You can operate music, photos, document files, video and applications on the device through a memory card.
When there is no Micro SD card inserted, your device will read from its internal memory.
Note: Do not use force when inserting a memory card.

Connecting to the PC

Files can be transferred directly to the device by using the USB data cable.
Make sure that your computer is powered on before you start.
Connect the mini plug of the USB cable to the mini USB port on your device and plug the other end into a free
USB port on your PC.
The computer will detect New Hardware and start to install the tablet's driver automatically. Wait for the
system to finish the installation. When it has finished, a new Removable Disk icon will be created .
When the device displays USB Connected, tap "Turn on USB Storage."Then, the screen will show a yellow
interface: Turn off USB storage.
Drag and drop the files on your computer to the Removable Disk.
To disconnect the USB cable from the computer, double-click the Safely Remove Hardware icon on the task
bar. Click USB Mass Storage Device and "OK." Then you can safely unplug the player.
7