Samsung NP300E5E User Manual page 62

Wired Network
4
Select Internet Protocol Version 4(TCP/IPv4) from the list
of Network Components and click Properties.
• The Network Component name may differ depending on
the Operating System Installed.
• To add a network component, click Install in the screen
shown in the figure above. You can add clients, services,
and protocols.
5
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select Use the
following IP address, and set the IP address manually.
When not using DHCP, ask your network administrator for the
IP address.
6
When you have completed the settings, click the OK button.
The network settings have been completed.
Chapter 3.
61
Using the computer