Status Indication; Wiring Diagram - Gianni Industries DG-101 Operation Manual

Ⅲ. Status Indication
LED
Beep
Ⅳ. Wiring Diagram
Note:
 The door strike or relay must have a varistor or a diode across the door strike terminals
to suppress the back EMF of the strike – failure to do so will damage the relay contacts
and electronic components, or even burns the controller.

Additional input for anti-tailgating function to ensure high security access control. If the
relay strike time set to 10 seconds and the door is closed in 3 seconds, the 7 seconds
will be cut off automatically.
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG101 Ver. D Publish:2009.12.24
Green On Power on, Standby
Red On First relay active
Yellow On Second relay active
1 Beep Valid key press
2 Beeps Enter, exit setting mode
3 Beeps Incorrect operation
5 Beeps Master Code back to 12345
Page: 2/ 3