Table of Contents
Advertisement
FEATURES AND MENUS
CHOICE
LISTS
Choice lists are used to choose a particular setting from a list of
settings.
1.
Point to a choice from the list and press MENU or OK to select
that choice.
Now that you know how to access the menus and adjust the control
panels the following
pages provide
a brief explanation
of all the menu
f_atures. The f_atures are organized
in order of their location
on the
Main
Menu.
AUDIO
MENU
Mute Press OK to r_duce the TV's volume to its minimum level. Press
OK again to restor_ the volume.
Tone Controls
Displays the slider controls for adjusting the TV's treble,
bass and balance.
Audio Processor Displays a choice list of available audio modes,
which control the way the sound comes through your speakers.
Mono
Hays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Stereo
Splits the incoming stereo audio signal into left and right
channels. Most TV programs and r_corded materials have stere()
audio. The TV displays the word STEREOwhen you tune to a
program that is broadcast in stereo.
SRSStereo (-) SRS* is an audio processing technology that adds
greater depth and stere() separation to stere() audio signals.
Enhanced SRSStereo
Enhances the SRSsignal to give the
impression of even greater depth and stereo separation.
Sound Logic Stereo Sound Logic monitors a program's audio track
and limits volume excursions to a minimum and maximum
volume range from the current volume setting. Acting like a
dynamic range, it compresses to limit sudden volume increases,
like when a commercial comes on.
* SRS, Sound Retrieval System and the SRSlogo (o) are registered trademarks of SRS Labs, Inc.
28
Advertisement
Table of Contents
