Safety, Electromagnetic Compatibility, And Ce Compliance - National Instruments NI 5421 Specifications

Safety, Electromagnetic Compatibility, and
CE Compliance
Specification
Safety
Note: For UL and other safety certifications, refer to the product label or visit
, search by model number or product line, and click the appropriate link in the
certification
Certification column.
Emissions
Immunity
EMC/EMI
This product meets the essential requirements of applicable European Directives as amended for
CE marking, as follows:
Low-Voltage
Directive (safety)
Electromagnetic
Compatibility
Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory
compliance information. To obtain the DoC for this product, visit
search by model number or product line, and click the appropriate link in the Certification column.
© National Instruments Corporation
Table 16.
The NI 5421 is designed to meet the requirements of the
following standards of safety for electrical equipment
for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1
CAN/CSA-C22.2 No. 61010-1
EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
EN 61326:1997 + A2:2001, Table 1
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Notes:
1. This device is not intended for, and is restricted
from, use in residential areas.
2. For EMC compliance, operate this device with
shielded cabling.
3. When connected to other test objects, this product
may cause radio interference. If this occurs, you
may be required to take adequate measures to
reduce the interference.
73/23/EEC
89/336/EEC
Value
ni.com/certification
33
Comments
—
ni.com/
—
—
—
—
—
,
NI 5421 Specifications