Appendix C: Troubleshooti Ng - RCA F32676SBFM2CD2 User Manual

Table of Contents

Advertisement

TROURLESHOOTI
NG
Troubles sometimes
are caused by simple "faults"
that you can correct without
the help of a service technician.
If you experience any difficulty
with your TV, check a few basic remedies before calling your service technician.
TV will
not turn
on
Check to make sure it is plugged
in.
Check the wall receptacle (or extension
cord) to make sure it is "live" by plugging
in something
else.
Maybe batteries
in remote control are "dead,"
Maybe remote control
is not aimed at remote sensor.
Controls
don't
work
If using remote control,
make sure remote is in TV mode by first pressing TV button.
Try unplugging
set for two minutes and then plug it back in and turn it on again.
Problems with Remote
Maybe something
is between the remote and the remote sensor.
Maybe the remote is not aimed directly at the component
(TV or VCR) you are trying to control.
Maybe remote is not in TV Mode.
Press the TV button
so remote will control TV.
Maybe batteries
in remote are weak, dead or installed incorrectly.
Try replacing
batteries.
(Note, if you
remove the batteries, you may have reprogram
the remote to control other components.)
Turns off while
playing
Schedule function
may have been activated.
Electronic protection
circuit may have been activated
because of a power surge. Wait 30 seconds and then
turn on again.
If this happens frequently,
the voltage
in your house may be abnormally
high.
TV Turns on unexpectedly
Schedule On function
may have been activated.
Schedule
does not turn
off the TV at the set time
Check schedule on/off function
(it must be set to On).
Check to make sure clock is set to the correct time.
70

Advertisement

Table of Contents
loading

Table of Contents