RCA F32676SBFM2CD2 User Manual page 46

(Channel Menu continued)
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCR1, DVD.VCR2, or SAT.CABLE).
Set VCR 1 Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the VCR1
button.
Set DVD.VCR 2 Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press the
DVD,VCR2 button.
Set SAT,Cable Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press the
SAT,CABLE button.
The choices are:
Not Connected Choose this if you do not have a
component connected to an antenna or video input on the
back of the TV, or if you don't want the TV to tune to a
channel when the particular component button is pressed.
Channel 2 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component's
Ch 2/3/4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 3 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 3.
Channel 4 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 4 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 4.
Video 1 Input Choose this if your component is connected
to the Video 1jacks on the back of the TV and you want the
TV to tune to Video1 input when you press the specified
component button.
Video 2 Input Choose this if your component is connected
to the Video 2jacks on the back of the TV and you want the
TV to tune to Video 2 input when you press the specified
component button.
44