RCA F32676SBFM2CD2 User Manual page 68

TV, (2) VCRS, AND SATELLITE RECEIVER
(CONNECTION I)
This information applies to Connection I in the Connections
Foldout.
Connection I provides:
stereo sound from broadcast programs
stereo sound from VCR
Picture in Picture (PIP)
Watch one channel on TV while recording another channel
To use this connection you must have:
(5) coaxial cable
(9) audio/video cables
(1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection I.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION I
To watch TV programs:
1. Turn VCR and satellite receiver and laserdisc player off.
2. Press TV and tune to a channel.
To watch Satellite programming:
1. Press SAT.CABLE and tune to a channel.
To record from one VCR to the other (tape dubbing):
1. Turn satellite receiver off.
2. Insert original tape into VCR2.
3. Insert blank tape into VCR1.
4. PressVCR1.
5. Set VCR to line input (for more, see your VCR User Manual).
6. Press RECORD to begin recording.
7. Press DVDoVCR2, then press PLAY.
CABLE, CABLE BOX, OR ANTENNA
SATELLITE SIGNAL
SATELLITE RECEIVER
®
See Connections Foldout,
Connection I
66