Table of Contents
Advertisement
Connections
& Setup
Jacks on the Back of Your TV
If you are connecting
many components,
please consuh the manual that came with each
component
for connection
instructions.
The picture of your TV's back panel describes
the
.jacks on the back of your TV and what types of components
that you can connect
to these jacks.
When connecting,
make sure you connect
Output jacks to Input jacks, Video to Video, Right
Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO
R and L and VIDEO
Connect
any of the {bllowing components:
•
DVD Player
• Satellite P,eceiver
•
Laserdisc Player
• VCR
•
InternetAccess
Device
To watch the content
from the component
that's
connected
m the VIDEO Input Jack, press the
WHO • INPUT button on the remote. (the TV
switches to the correct channel).
TV
backpanel)
/
AUDIO
VIDEO
R
L
G-LINK
/
1
G-LINK Jack
Connect
the end of the
(;-LINK cable (provided)
to this
_
CABLE/
ANTENNA
CABLE/ANTENNA
Jack
Connect the coaxial cable fl-om
the VCR's Output jack to this
.jack. If you're not connecting
a
jack. The (;-LINK cable enables
the TV s Guide Plus+ s}stem to
interact with the cable box
and/or
the VCR. A picture of
the G-LINK cable is on page 7.
VCR, connect
a coaxial cable
that carries the signal from the
anr_.nna, cable, or cable box m
the (_BLE/ANTENNAjack.
12
Chapter
Advertisement
Table of Contents
