Advertisement
Thechannel memory is thelist of TV
channel numbers y ourTV will stop
onwhenyoupress the
CHANNEL
up
or down button.
You can program
any list of channels
into the channel
memory.
The quickest
way to program
your
channel memory
is to use the
A UTOPROGRAM
function.
If you
use the A UTOPROGRAM
function,
your TV will automatically
cycle
through all channels
and place active
channels
into the channel memory.
First follow the instructions
to
autoprogram
channels,
and then add
or erase individual
channels
as
desired.
Notes:
• The AutoProgram
feature
will place into
memory
active TV channels
that have a
valid signal at the time you autoprogram
your TV.
• An active channel
may be missed
occasionally
if its signal
is very weak or if
the channel
happens
to be "off the air"
when the TV is autoprogrammed.
• An inactive
channel
may be included
in the
channel
memory
if there happens
to be
some sort of "noise"
or "stray
signal"
on
the channel
when the TV is
autoprogrammed.
• Signals
from other components
connected
to the INPUT
jacks can not be
autoprogrammed.
Channel
91 (which
accesses
INPUT
I jacks)
was added to the
channel
memory
at the factory
and will
remain
in the channel
memory
until you
erase
it. Channel
92 (INPUT
2) and
Channel
90 (S-VIDEO
connector)
can be
added to channel
memory
if desired.
• Only channels
1-99 can be stored
in
channel
memory.
1. AutoProgramming
Channels
into Channel
Memory
--(with
or without remote)
1.
.
Connect home antenna(s) or cable-
TV to your set.
After you have turned on the TV
and adjusted
the volume,
repeatedly
press MENU to select SETUP
MENU, and then press + or - to
display the setup functions.
Repeatedly
press MENU to select
the A UTOPROGRAM
function.
3. Press either + or - to begin
autoprogramming.
The TV will first
program
all channels
for ANTA
input and then program
all channels
for ANT B input (even if you only
have one antenna
input connected).
4. Whcn thc rI'V is finislacd cycling,
yOU can check to see which channels
are in memory
by pressing
the
CHANNEL
up or down button.
2.
Erasing/Adding
Channels in Channel
Memory
-- (with or without remote)
o
To erase or add a channel,
repeatedly
press MENU to select
SETUP MENU, and then press + or
- to display the setup functions.
Repeatedly
press MENU
to select
CHAN MEM function.
2. Then select the desired channel
number
by pressing
CHANNEL
up
or down (or the two corresponding
number
buttons
on the remote).
3. Press + to add the channel
to
memory,
or press - to erase the
channel
from memory.
3.
Adding Video Input Channels
to Channel Memory
-- (with remote)
If you have a video device connected
to
the S-VIDEO
or INPUT jacks on the
back of the TV, you can view its signal
either by directly selecting
channel 90
(for S-VIDEO
connector),
channel 91
(for INPUT 1 jacks),
or channel 92 (for
INPUT
2 jacks) with the number buttons
on the remote or by adding those
channels to the channel memory.
Adding
channels
90, 9 l, and 92 to
channel memory
allows access to the
video inputs at the TV by pressing
the
CHANNEL
up and down buttons
as
well as by using the remote control.
22
Advertisement
