Advertisement
Your TV includes
a feature called
SRS (O)*
(Sound Retrieval
System)
which brings dimensional
realism to
both stereo and mono broadcasts.
When the SRS ON/OFF
function is
set to ON and the STEREO/SAP
function
is set to STEREO,
your TV
electronically
increases
the audio
separation
of the speakers so you can
perceive
a more spacious
stereo
sound effect.
If a stereo signal is not
present, you can set the SRS
ON/OFF
function
to its SYNTH
STEREO
setting to synthesize
and
process the mono signal.
When the SRS ON/OFF
function is
set to ON, you can also change the
next menu item called SRS WIDTH
between NORMAL
or ENHANCE.
When this function
is set to
ENHANCE,
the perceived
audio
separation
will be greater.
Try both
settings
and select the one you prefer
for your room acoustics.
Note:
Some material
(audio)
will be more
affected
than others.
SRS (O) allows you to hear multiple
sound sources.
Audio frequencies
are
processed
to establish
directional
cues which gives the impression
that
sound is coming from all parts of the
room. External
speakers
are not
required,
but the addition
of high
quality external
speakers optimizes
the sound performance
of your TV.
*SRS
and (O) arc registct'cd
tuadelnae'ks
of Hughes
Aircraft
Company,
a division
of GM Hughes
Electronics.
-Turning
On SRS (O)
1. Repeatedly
press the MENU button to
select AUDIO
MENU, press +, and
then repeatedly
press MENU again to
select SRS ON/OFF
function.
Notel
You can also) changc the
SRS:ON/OFF
function
between
ON and
OFF without
going through
the menu by
pressing
the SRS button on the remote.
2. Repeatedly
press the + button to
change the setting between
OFF,
ON, and SYNTH STEREO.
• If the broadcast
you are receiving
is
stereo audio, select ON. The
STEREO/SAP
function must be set
to STEREO
before you can hear
SRS (O)
sound with this setting.
• If the broadcast
you are receiving
is
mono audio, select SYNTH
STEREO.
• If you do not want SRS (O),
select
OFF.
3. Press MENU button to select next
menu item called SRS WIDTH.
Pressing
+ or - will change the
setting between
NORMAL
and
ENHANCE.
Try both settings
and
select the one you prefer.
Note:
After turning
SRS of synthctic
stereo on, you may find it desirable
to
readjust
the VOLUME,
BASS,
and
TREBLE
controls
to optimize
the sound.
The SRS effect, tonal balance,
and
volume
level will vary from channel
to
channel
depending
on the production
qualities
of the program
material.
15
Advertisement
