Language - Edimax NC-203 User Manual

Here are the descriptions of every setup item:
Item
Reboot
Reset
Backup
Backup to SD
card device
Restore
Restore from
SD card device
Upgrade

3-14 Language

You can change the display language of web interface.
Click 'Language' button and select one language.
Description
Click this button to reboot the IP camera. This
function is useful when you find IP camera is not
working properly.
Clear all settings of IP camera and reset to factory
default setting.
Backup IP camera's setting and save it on your
computer.
Backup IP camera's setting and save it on SD card. A
SD card must be inserted into SD card slot when you
click this button, or you'll receive an error message.
Restore a previously-saved configuration file saved
on your computer. Click 'Browse' button to select a
file on your computer first, then click 'Restore'
button.
Restore IP camera's configuration which is
previously-saved on SD card.
Upgrade IP camera's firmware. Click 'Browse' button
to select a firmware image file on your computer
first, then click 'Upgrade' button.
54