Edimax PS-3101 Quick Installation Manual

H o w t o c o n
H o w t o c o n
T h i s F A Q i s a p p l i
T h i s F A Q i s a p p l
P S - 3 1 0 1 / P
P S - 3 1 0 1 / P
W i n d o w s 2
W i n d o w s 2
I n t r o d u c t i o n :
I n t r o d u c t i o n :
This installation guide is for walking you through the configuration of Edimax
Printer Server as shown in the below figure. No software is required for sharing Printers
in this way.
Step by step
Step one : Change the default IP of Edimax print server from
10.0.0.1 to fit within the IP ranges of your office LAN.
1. Shut down both the Edimax print server and the PC used to configure the
prnter server. Power on the print server before booting up the PC.
2. Connect the PC to the print server like figure below..
Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved
f i g u r e P r i n t e r
f i g u r e P r i n t e r
e d t o t h e b e l o w m
i e d t o t h e b e l o w m
S - 3 1 0 3
S - 3 1 0 3
0 0 0 / X P o n l y
0 0 0 / X P o n l y
S e r v e r t h r o u g
S e r v e r t h r o u g
o d e l s a n d o p e r a
o d e l s a n d o p e r a
h T C P / I P ?
h T C P / I P ?
A u t h o r : L o
A u t h o r : L o
( 2 0 0
( 2 0 0
t i o n s y s t e m s :
t i o n s y s t e m s :
n g c e n t
n g c e n t
6 . 1 2 . 1 1 )
6 . 1 2 . 1 1 )