Installing A Hard Disk Drive/Cd-Rom/Sata Hard Drive - ECS Motherboard Manual

Type Size Vendor
256MB
512MB
DDR2 800 APOGEE
APOGEE
1GB

Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive

This section describes how to install IDE devices such as a hard disk drive and a CD-
ROM drive.
About IDE Devices
Your motherboard has one IDE
devices is bundled with the motherboard.
You must orient the cable connector so that the pin1 (color) edge of the
cable corresponds to the pin 1 of the I/O port connector.
IDE1: IDE Connector
This motherboard supports six high data transfer SATA ports with each runs up to
3.0 Gb/s. To get better system performance, we recommend users connect the CD-
ROM to the IDE channel, and set up the hard dives on the SATA ports.
Installing the Motherboard
Module Name
Infineon HYS64T32000HU-25F-B
A-DATA M2OAD6G3H3160I1E53
Aeneon AET660UD00-25DB98X
Apacer AU512E800C5KBGC
AU51082-800P505
Infineon HYS64T64000HU-25F-B
Kingston KHX6400D2ULK2/1G
Nanya NT512T64U88BOBY-25C
PSC AL6E8E63H-8E1
AU1G082-800P000
Infineon HYS64T128020HU-25F-8
Kingston KHX6400D2ULK2/2G
Nanya NT1GT64U8HBOBY-25C
PSC AL7E8E63H-8E1
UMAX 53016042-7100B
interface. An IDE ribbon cable supporting two IDE
17