Whirlpool WEL98HEBU0 Use & Care Manual page 10

4. Select the desired cycle
NORMAL
CASUAL BULKYITEMS
DELICATE JEANS
cy_l_
TIMED HEAVY
DRY DUTY
QUICK TOWELS
DRY
ManualCycles -
SPECIALTY
CYCLES TOUCH UP
MY CYCLE 'UICK REFRESH
Steam C
Select the desired cycle for your load. See the "Cycle Guide"
or the display for more information about each cycle.
If selecting Timed Dry, use LCD control buttons to adjust the
length of the cycle.
5. Set any cycle settings
iiiiiiiiiWdnk!
iiiiiiii 5 hieldiiiiiiiiiiii
iiii wlt_S_eam
<_ Back
_i_i_i_i_i_i_i_i_i_i!_!_!_!_!_!_!_!_i_i_ii_ii_ii_ii_ii_ii_ii_ii_iiiiiiiiiii_ii_i
More Info
The default cycle settings will be displayed on the LCD screen.
You may adjust different settings, depending on whether you
have selected an Auto Cycle, Manual Cycle, or Steam Cycle.
See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Auto Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Automatic cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Manual Cycles:
When you select a Manual Cycle, the default time is displayed.
Use the LCD control buttons to increase or decrease the time
in 1 minute increments. Press and hold to change the time in
5 minute increments.
The default temperature may be changed by pressing the
Temperature button until the desired dry temperature is
selected.
Quick Refresh with Steam:
Select the number of garments in the load. The dryer will
automatically set the drying time and temperature.
10
Changing the Auto Cycle settings
to increase drying time
If all your loads on all Auto Cycles are consistently
not as dry as you would like, you may change the default
settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is saved in memory and will affect
all of your Automatic cycles, not just the current cycle/load.
Back
Mo_e Info
There are 3 drying settings:
Factory preset dryness level.
Slightly drier clothes, 15% more drying time.
Much drier clothes, 30% more drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(the power button is off) to adjust the default settings.
<_ Back More Info
1. Before starting an Auto cycle, press and hold the LCD
control button for Dryness Level for 6 seconds. The
LCD will briefly display the regular Dryness Level options,
then change to show the default setting options.
2. Press the LCD control button for the desired setting.
3. Press the BACK button to return to the main screen
for the selected cycle.
!
6. Select any additional options
Static Reduce
/_ Smart Grid
_EcoBoost
Press and Hold
for Drum Light
(options vary by model)
Add additional options such as Static Reduce, Smart Grid,
Wrinkle Shield
TM
with Steam, and/or EcoBoost
TM
by pressing
the button for that option.
NOTE:
[] Not all options and settings are available with all cycles,
and not all features and cycles are available on all models.
[] On model WEL98 only, see the "Smart Feature Sheet"
for information about setting up Smart functionality, turning
it on and off, receiving important notifications, and taking
advantage of available features.