Turntable; Tones; Display Messages - Whirlpool GH7145XF Use & Care Manual

Hide thumbs Also See for GH7145XF:
Table of Contents

Advertisement

rURNTABLE
PROBLEM
The turntable will
not turn.
CAUSE
• You have turned off the turntable. (See the "Heating more than one plate of
food" section on page 17.)
• The turntable is not correctly in place. It should be correct-side
up and sitting
firmly on the center shaft.
• The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service" technician
for repair. Cooking without the turntable can give you poor results.
TONES
PROBLEM
CAUSE
You do not hear the
• You have not entered the correct command.
programming
or
• You have turned off the tone. (See the "Audible signals" section on page 16.)
end-of-cycle
tone.
DISPLAY
MESSAGES
PROBLEM
CAUSE
The display is flashing ":".
• There has been a power interruption. Reset the clock. (See the "Setting the
clock" section on page 20.)
If none of these items are causing your problem, see the "Requesting Assistance or Service" section on page 44.
43

Advertisement

Table of Contents
loading

Table of Contents