Whirlpool WRF560SMYB00 User Instructions page 10

The accessory packet includes twoproduce preserver pouches,
which should b einstalled ina crisper drawer prior t ouse.
NOTE: For b est p erformance, always u setwopouches.
The produce preserver absorbs ethylene, toslow theripening
process ofmany produce items. Asaresult, certain p roduce
items will s tay fresh longer.
Ethylene production and sensitivity varies d epending onthetype
offruitorvegetable.
Produces Ethylene
Sensitivity
to
Ethylene
High
Med.
Low
Very Low Med. High Very
Low High
Broccoli
Lettuce
Spinach
Asparagus Canta-
Citrus fruit Ioupe
Carrots
Grapes
Apples
Installing the Produce Preserver
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.
FIRST AID TREATMENT: Contains potassium
permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.
The produce preserver pouches should be installed in the
housing, located on the wall of one of the crisper drawers.
1. Remove the Fresh Flow
TM
Produce Preserver pouches from
the packaging.
2. Lift up on the housing to remove it from the mounting tab.
3. Open the housing by pulling up and out on the back of the top
of the housing.
4. Place both pouches inside the housing, then snap the housing
back together.
5. Place the housing back on the mounting tab.
Installing the Status Indicator
The produce preserver comes with a status indicator, which
should be activated and installed at the same time the pouches
are installed.
1. Place the indicator face-down on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator until
the bubble pops, to activate the indicator.
3. Slide open the cap on the top of the produce preserver
housing.
4. Place the indicator in the top of the housing, facing outward.
5. Slide the cap closed, and check that the indicator is visible
through the rectangular hole in the cap.
NOTE: The cap will not easily close if the indicator's bubble
has not been popped.
Replacing the Produce Preserver
The disposable pouches should be replaced every 6 months,
when the status indicator has completely changed from white to
red.
To order replacements, contact us. See "Accessories" for ordering
information.
1. Remove the used pouches from the produce preserver
housing.
2. Remove the used status indicator.
3. Install the replacement pouches and status indicator using the
instructions in the previous sections.
The following accessories are available for your refrigerator. To
order, contact us and ask for the part numbers.
In the U.S.A., visit our web page www.whirlpool.com/accessories
or call 1-800-901-2042.
In Canada, visit our web page www.whirlpoolparts.ca
or call 1-800-807-6777.
Stainless Steel Cleaner and Polish:
Order Part #4396095
Air Filter:
Order Part #W10311524 or AIR1
Ethylene Filter:
Order Part #W10346771A or FRESH1
10