Temperature Control
For your convenience, the temperature control is preset at the
factory. When you first install your refrigerator, make sure the
control is still set to the recommended
setting as shown.
Recommended
Setting "3 Snowflakes"
Adjusting the Controls
If you need to adjust the temperature
in either the refrigerator or
freezer compartment,
use the settings listed in the following chart
as a guide.
•
Press the TEMP button to display the desired number of
snowflakes from (1 snowflake [least cold] to all snowflakes
[coldest]).
NOTE: Except when starting the refrigerator, do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
FRIDGE TEMP one
more snowflake
FREEZER too warm/too little ice
FREEZER TEMP one
more snowflake
REFRIGERATOR too cold
FRIDGE TEMP one less
snowflake
FREEZER too cold
FREEZER one less
snowflake
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is
turned off.
To turn cooling off, press and hold both the FAST COOL and
MOISTURE CONTROL buttons, at the same time, for
3 seconds. When cooling is off, the Cooling Off icon will
appear on the display.
To turn cooling back on, press and hold both the FAST COOL
and MOISTURE CONTROL buttons, at the same time, for
3 seconds. When cooling is on, the Cooling Off icon will
disappear and the previously selected settings will be
displayed.
Page 11