Whirlpool RF377PXG Use & Care Manual page 30

1. Press AUTO CLEAN.
Thecleanindicator l ightwill lightup.
Thiswill automatically seta 3_i2-hour
Self-Cleaning cycle.
NOTE: T herewill bea 30-minute cool-down
_2hourbefore thecycleis over.
PRESS YOU SEE
ON
|
2. Set the cleaning time (optional).
PRESS
If you want a Self-Cleaning cycle longer or
shorter than 31/2hours, use the hour and minute
®
pads to set the cleaning time you want. Press
the "up" (A) or "down" (V) pad(s) until a time be-
tween 2_/2-4_/_hours shows on the display.
eUse 21/2hours for light soil.
• Use 3_/2-4V_hours for average to heavy soil.
YOU SEE
3. Start the oven.
The on and heat indicator lights will light up.
NOTES:
• Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
• Do not attempt to open the oven door while
locking.
PRESS
ON
|
(example shows 41/2-hour
cleaning time)
YOU SEE
ON
|
4. After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5. After the Self-Cleaning cycle ends and the oven
reaches normal baking!roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display. PRESS
YOU SEE
ON
|
6. After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or
sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
30