Download Print this page

Whirlpool series 980 Use And Care Manual page 21

Hide thumbs Also See for series 980:

Advertisement

_iiiii!!!!i!_iiiiii_o,
_iiii_i
'_' ilii _iii_iiii"i_i_
!!!ii_iiii_
'_!_' o _i_iiii
_i ,'_ ,_iiiii _ii!!;i;
!iiiilili_
w' _iii!!!!ili_i_
_ii'i!!_i;_
!iiiilili_
_,i_!_i,l,ii_;_
_iiiii
'_'_
Storing
for
the
summer
6. Reconnect both water inlet and water
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
Moving
or winterizing
your
dishwasher
Protect your dishwasher and home against
water damage due to freezing water lines. If
your dishwasher is left in a seasonal dwell-
ing or could be exposed to near freezing
temperatures,
have a qualified person do
the following:
1. Disconnect power or unplug dishwasher.
2. Turn off water supply to the dishwasher.
3. Remove the 4 screws on the lower
access panel and remove the lower
access panel.
4. Place a shallow pan under the water
supply valve. Then, use a wrench to
disconnect the water inlet from the water
supply valve. Separate the water inlet
from the water supply valve and drain
water into the pan.
& Remove the spring clamp from the water
outlet and separate from the water
supply valve; drain water into pan.
outlet to the water supply valve.
Spring
Water pump
Water outlet
clamps
and motor
II
....
...........
i ______
t
Water supply
Water
Drain
valve
inlet
hose
7. Empty the pan and reposition it under the
water pump.
8. Remove the clamp and disconnect the
drain hose from the water pump; drain
water into pan.
9. Reconnect drain hose to the water pump,
being sure to position the clamp over the
connection.
10.Replace the lower access panel.
NOTE: If your dishwasher is connected to a
garbage disposal, do not run water into the
sink after winterizing. This could cause
water to refill the drain hose on your dish-
washer.
Reconnecting
your
dishwasher
after
storage
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Reconnect power or plug in dishwasher.
4. Run dishwasher through a complete
cycle and check for leaks.
& Replace lower access panel.
21

Advertisement

loading