Adding Items - Whirlpool series 980 Use And Care Manual

LjiL i!:!i;ii iiii!i i ii ¸,¸¸ il ilo ii! iiiii i!! ;
Use a delayed start to run the dishwasher
during off-peak hours to reduce energy
usage or to reduce daytime heat buildup in
your home.
1. Close door firmly until it latches.
4_
If desired, press one or more Option
pads.
The Delay Hours indicator
stays on until the wash cycle
begins.
To cancel delay and start the
dishwasher:
2. Press the Delay Hours pad once for a
2-hour delay start, twice for 4
hours, or three times for 6
hours. The indicator will glow.
1. Press Delay Hours until the 6 glows.
2. Press Delay Hours one
more time. The delayed cycle
starts.
3. Press a Cycle. The Delay Start count-
down begins when you press
the Cycle pad. If you don't
press a Cycle pad within 30
seconds, the Delay Hours
indicator turns off.
To cancel delay and cycle:
1, Press Cancel/Drain. The Delay Hours
indicator will turn off.
2, Press new Cycle and Option
pads.
NOTE: You can add items to the load any-
time during the delay countdown. After
adding items, close the door firmly until it
latches. The delay countdown will not con-
tinue if the door is not latched.
17