Advertisement
Drying
Procedures
Follow fabric care label instructions.
Place small items in a mesh bag.
Fill dryer drum 1/3 to 1/2 full.
• Follow the guidelines below for preparing the load for drying.
• Read the Dryer Operating
Instructions
for operating your specific model.
• Always read and follow
fabric care labels and laundry product labels.
_To
reduce the risk of fire, electrical shock, or serious injury to persons
or property, comply with the basicwarnings listed in ImportantSafetylnstructions
and those listed below.
1.
Prepare
items
for drying.
•
Dry items of similar fabric, weight and construction in the same load.
•
Separate dark items from light-colored items. Separate items that shed lint
from those that attract lint. If an item sheds lint, turn it inside out.
•
Be sure buckles, buttonsand trim are heatproof and won't damagethe drum
finish. Close zippers, fasten hooks and Velcro®-Iike fasteners. Tiestrings and
sashesto prevent snagging and tangling.
•
If possible, turn pockets inside out for even drying.
•
Cbeck for stains which may not have been removed in washing. Dryer heat
may permanently set some stains. Repeat stain removal process before
drying.
•
Place small items in a mesh bag to prevent tangling and for easy removal.
2.
Check
that
lint
screen
is clean
and in place.
.
Load
the dryer.
•
The average loadwill fill the drum 1/3 to 1/2 full. Items need room totumble
freely for even drying and less wrinkling. De not overload
dryer.
•
When drying large items, dry only 2 or 3 at a time. Fillout the load with small
and medium sized items.
•
For delicate or very small loads, add 2 lint-free towels for better drying, less
wrinkling, and to prevent grease stains caused by fabric softener sheets.
•
Donotoverdryitems.Overdryingcancausewrinkling,
shrinkage, harshness,
and a build-up of static electricity, which can produce more lint.
•
If desired, add a dryer fabric softener sheet.
4.
Close
the dryer
door
and set dryer
controls
(some
models).
See Dryer Operating
Instructions card for your specific model controls.
5.
Turn
cycle selector
clockwise
to the desired
setting.
6.
Start
the dryer.
•
Turn Start control clockwise to ON. Hold for 1-2 seconds and release.
•
To add or remove items when the dryer isrunning, open the door. The dryer
will always stop when the door is opened.
•
Allow the drum to come to a complete stop before reaching inside.
7.
When
the
cycle
ends,
remove
items
immediately
and hang
or fold.
If load is removed before the cycle ends, turn cycle selector to OFF.
Advertisement
