Yamaha YSP-4300 Quick Reference Manual

Quick Reference Guide
This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation,
refer to the "Owner's Manual" in the supplied CD-ROM.
Check that you received all of the supplied accessories referring to "Supplied accessories" of "Safety and Accessory Information"
(separate booklet). For instructions on how to operate or set the external components, refer to the owner's manual supplied with each
component.
In this guide, the YSP-CU4300 center unit is used for illustrative purposes.
Installation Connection Settings Playback
Installing YSP-4300/YSP-3300
Center unit Subwoofer
Center unit Subwoofer
• Install the center unit in the center of the left and right walls. • To prevent sound reflecting off of walls, angle the subwoofer
• Place the center unit on a TV stand in front of the TV. slightly toward the center of the room.
Use the TV Remote Repeater function if the center unit • When installing the subwoofer on a rack, be sure the rack is
obstructs the remote control sensor on the TV (see page 12 of strong enough to support the subwoofer and that it leaves
the Owner's Manual). sufficient space for heat discharge.
Increase the height of the center unit if the TV stand is too high • The center unit and subwoofer communicate wirelessly.
for center unit installation (see page 12 of the Owner's Manual). Subwoofer performance may be affected if the subwoofer is
• The listening position (such as sofa, etc.) should be located at placed on a metal rack, or if there is a metal plate between the
the front of the center unit. subwoofer and the center unit.
• The distance between the listening position and the center unit • The subwoofer can also be placed on its side (see page 13 of
should be more than 1.8 m (6 ft). the Owner's Manual).
• This unit can be mounted on a wall using WALL MOUNT
BRACKET SPM-K20 (option). Refer to the SPM-K20 Install
Manual and SPM-K20 Information for YSP-CU4300/
YSP-CU3300.
This unit creates surround effects by reflecting sound beams off Parallel installation
the walls of your listening room. The arrows in the diagrams on the
40° to 50°
right indicate the images of paths of 5-channel sound beams. To
achieve desired surround sound effects, install this unit where
there are no objects such as furniture obstructing the path of sound
beams.
Objects,
1 Front left channel 4 Surround left channel
such as
2 Center channel 5 Surround right channel
furniture
3 Front right channel
Printed in Malaysia ZD75600 [En]
Installation Connection Settings
UCABGLVFH
Connection
When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio and video signals are transmitted
as shown below.
Audio
connection
This unit: Plays audio from TV broadcasts, Blu-ray discs, etc.
Video
connection
Audio and video
English connection
HDMI cable
HDMI cable
Game console
(HDMI compatible)
Blu-ray disc player Satellite and cable TV tuner
(not HDMI compatible)
• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.
■
Connecting a TV and a Blu-ray disc player
For the cable connection, follow the procedure below.
1. 2.
HDMI cable (optional) HDMI cable (optional)
Input the digital audio/video signals of The digital video of the Blu-ray disc
the Blu-ray disc player to this unit. player is reflected on TV.
U.S.A., Canada,
Europe, Russia, and
China models only
1
3
1. Remove the cap
y
2
Corner installation
HDMI
OUTPUT Blu-ray disc player
Video signals
OPTICAL
1 2 3
Audio signals OUTPUT
HDMI INPUT
Objects, such as furniture
© 2012 Yamaha Corporation
Playback
yTips
Audio return channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack with "ARC" indicated) on TV. In this case, you do not need
to connect an optical cable.
• Activate the HDMI control function of this unit so as to activate the audio return channel (ARC) (refer to "HDMI setup" in the Owner's
Manual).
What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit through an HDMI cable. By this function, an optical cable to connect TV
and this unit is not needed.
■
Connecting a game console or satellite/cable TV tuner
HDMI cable
External device (example)
1
Optical cable
2
Use to connect a TV HDMI compatible
that does not support
3
audio return channel
(ARC) to this unit.
4
Optical cable
not HDMI compatible
5
Composite video cable
TV: Plays video from TV broadcasts,
Blu-ray disc player, etc.
3.
Optical cable (supplied)
Play back digital sounds of TV on this
unit. y
4.
To AC wall outlet
HDMI HDMI
OUTPUT OUTPUT
2. Check the direction
of the plug
Video signals
Audio signals
yTip
To connect a device with an AUX output jack, connect its AUX output jack to the AUX INPUT DIGITAL (coaxial) jack on this unit via a
TV
commercial coaxial digital audio cable.
■
Connecting the FM antenna (YSP-4300 only)
Connect the supplied FM antenna via the FM ANTENNA jack.
Connecting cable
■
Connecting the wireless subwoofer
Satellite/cable TV tuner HDMI cable (optional)
Game console HDMI cable (optional)
Game console HDMI cable (optional) To connect the supplied subwoofer to the center unit wirelessly, the same
group ID must be assigned to the center unit and subwoofer. The default
Optical cable (supplied)
group ID for both components is A1, enabling wireless connection by
Satellite/cable TV tuner
Composite video cable (optional)
simply plugging the subwoofer's power cable into an electrical outlet.
When using the transmitter (YIT-W12TX)*, the same group ID must be
RCA stereo cable (optional)
Game console
assigned to the center unit and subwoofer. The default group ID of
Composite video cable (optional)
YIT-W12TX is A1.
The LINK indicator lights when the subwoofer is on and the subwoofer
and center unit are connected wirelessly.
When the center unit enters standby mode, the subwoofer and LINK
indicator turn off.
To AC wall outlet
y
* For details of YIT-W12TX, refer to "Safety and Accessory Information"
(separate booklet).
U.S.A., Canada,
Europe, Russia, and
China models only
■
Preparing remote control
Install the batteries
R L
ANALOG
OUTPUT
OPTICAL
OUTPUT VIDEO VIDEO Pull up on the latch to
OUTPUT OUTPUT
release the cover
HDMI
OUTPUT
TV
Insert the
protrusions into
VIDEO VIDEO the slots and
INPUT INPUT
close the cover
FM antenna
Group ID switches
A
B
C
B A
C
2 1
3
LINK
1
2
3
LINK indicator
LINK
Blinks: Establishing
connection
Lights: Connection
established
To AC wall outlet
Operation range
Within 6 m (20 ft)
Battery × 2
(AAA, R03, UM-4)