Connecting Machine To Power Source - Singer 2932 Instruction Manual

A
Connecting machine to power source
Connect the machine to a power source as illustrated. (I)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention: I
Consult a qualified electrician if in doubt as to connect machine I
to power source. Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-1902 I
(t10-120V area)/ KD-2902 (220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China
Sewing light
Press main switch (A) for power and light on " I ".
2 3
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded
10