Appendix; Remote Control Unit - Sharp LC-46SV50U Operation Manual

Appendix
Problem Possible Solution
• Check if you pressed POWER on the remote control unit.
(See page 21 .) If the indicator on the TV is still red,
• No power press POWER on the TV.
• Is the AC cord disconnected? (See page 9.)
Has the power been turned on? (See page 21 .)
• External influences such as lightning, static electricity, may
Unit cannot be cause improper operation. In this case, operate the unit after
operated, first turning off the power of the TV or unplugging the AC cord
and re-plugging it after 1 or 2 minutes.
Are batteries inserted with polarity (÷, ) aligned?
(See page 12.)
Remote control unit = Are batteries worn out? (Replace with new batteries.)
does not operate. • Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control
sensor?
• Picture is cut off/with o Are screen mode adjustments such as picture size made
sidebar screen, correctly? (See page 25.)
Strange color, • Adjust the picture tone. (See page 29.)
light color, or color = Is the room too bright? The picture may look dark in a room
misalignment that is too bright.
• Is the sleep timer set? (See page 23.)
Power is suddenly
turned off. = The unit's internal temperature has increased. Remove any
objects blocking vent.
Is connection to other components correct? (See page 16.)
• No picture • Is the correct input selected? (See page 16.)
e Is the volume too tow? (See page 23.)
No sound • Have you pressed MUTE on the remote control unit?
(See page 23.)
• The TV sometimes • This is not a malfunction. This happens when the cabinet
makes a cracking slightly expands and contracts according to change in
sound, temperature. This does not affect the TV's performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a tow temperature space (e.g. room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the unit will
recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the Liquid Crystal panel to malfunction.
Storage temperature: -4°F to +140°F (-20°C to +60°C)
(D- 40