Advertisement
On-Screen
Display
Menu
For automatically
adjusting
tile PC image.
Yes: Auto Sync. starts.
No: This function does not work.
o When "Auto Sync." is successful, "Completed" displays. If
not, "Auto Sync." failed.
o "Auto Sync." may fail even if "Completed"
displays.
o "Auto Sync." may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing "Auto Sync.".
o Be sure to connect the PC to the TV and switch it on before
starting "Auto Sync.".
Ordinarily
you can easily adjust the picture as
necessary
to change
irrlage position
using "Auto
Sync.".
In some cases,
however,
manual
adjustment
is
needed
to optimize
the image.
H_Pos,: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Phase: Adjust when characters have low contrast or
when the image flickers.
o For resetting all "Fine Sync." adjustment items to the factory
preset vahJes, press A/T
to select "Reset", and then press
ENTER.
o It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
o The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical
Determines
whether
the AUDIO terminal
is used for
INPUT 4 (PCqN)
or INPUT 6 (HDMI).
INPUT4 (PC}: Sebct this item when the audio signal is
input via the INPUT 4 (PCqN) terminal using an analog
RGB cable (D sub 15 pin cable or VGA cable).
INPUT6 (I..IDMI): Sebct this item when the audio signal
is input via the INPUT 6 (HDMI) terminal using a DVI
HDMI conversion cable.
o When "PC Audio Select" is set to 'qNPUT6 (HDMI)", sound
will not be produced if you use one/an HDMI certified
cable to connect HDMI compatibb equipment. To produce
sound, you should make an analog audio connection.
o If you want to connect HDMI-compatibb
equipment using
only an HDMI certified cable, set "PC Audio Select" to
"INPUT4 (PC)".
To watch
an HDMI or PCqN equipment
image,
select "INPUTS",
"INPUT6"
or "INPUT7"
from "INPUT
SOURCE"
menu using INPUT on the remote
control
unit or on the TV.
Enable: To use View Mode based on signal recognition,
including an HDMI signal.
Disable:
No function.
• Refer to your external equipment operation manual for the
signal type.
o When connecting a DVI HDMI conversion adapter/cable
to
the HDMI terminal, the image may not come in clearly.
You can output digital audio to an AV amplifier
or
similar device
whose
DIGITAL AUDIO INPUT terminal
is connected
to the DIGITAL AUDIO OUTPUT
terminal
on the TV. Please select an audio output format
corrlpatible
with the audio format of the program
you
are watching
and the equipment
connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
You can also select a language
from the Setup menu.
Select from among
3 languages:
English, French and
Spanish.
If complex
adjustments
are made and the settings
cannot
be restored
to normal,
you can reset the
settings
to the factory
preset values.
1
"Return to factory
pre-setting"
displays
on the
screen.
o If you have already set the Secret No., input the 4 digit
secret number here.
2 Select "Yes".
o After the reset has been compbted,
the power shuts off
and then comes back on. The screen will have returned
to its original settings.
o The Channel Setup settings will not be changed.
o The Language settings will not be changed.
o The Secret number settings will not be changed.
o The TV Location settings will not be changed.
21
Advertisement
